Gecko Aeware Spa Pack - in.ye-3-ce
3 Outputs
Gecko Aeware Spa Pack - in.ye-3
The in.ye is the perfect solution to bring your spas to the next level.
Universal fit
With their relays and their small footprint, Y series platforms were designed to fit in and to easily be installed, powered and connected to pumps and accessories of spas of all sizes and configurations, from simple entry level hot tubs to complex swim spa systems,Y series control systems meet all requirements.
Immediate boost
Y series boasts impressive features and the most advanced technology in convivial, reliable, safe and long-lasting control systems that benefit all spa users. Designed to deliver optimal performance and to provide total control at the users fingertips, Y series gives spa owners the immediate satisfaction of getting a lot more than what they expected from their spas.
Future expandability
Y series control systems open up on value-added features that increase the quality of users spa experience with plug and play addition of accessories and peripherals such as wireless control for mobile devices, water sanitation, audio streaming, auxiliary keypads and much more.
in.ye control systems open up to the addition of wireless control from mobile devices, water sanitisation, audio streaming and more to increase the quality of the spa experience.
With its new terminal block, onboard AMP connectors and an evolved cable strain relief system, it has never been easier to connect your accessories to a control box! We've also added a pathway to connected accessories with faster communication.
In.Temp Heat Pumps
The IN.YE V3 is compatible with IN.TEMP heat pumps with the use of an RS485 Communication Extension board (sold separately).
Compatible keypads:
- in.k600
- K-4
- in.k200
- in.k300
- K-8
- K-35
- K-19
- in.k450
- in.k500
- in.k800
- in.k1000
- in.k1001
Additional Information
Each pack supports a keypad, heater, a 12v AC light and configurable relays.
- Configurable relays (3, 5 or 7 depending on model)
- Solid-state water flow detection: No pressure switch to adjust
- IPX5 rated waterproof design
- Preloaded configuration allows fast and easy installation
- in.touch WI-FI module compatible
- Connector: AMP, Quick Connect, JJM adaptor available
- Supports 1, 2 and 3 phase input power
- Standard 3kW, 2" x 15" flow thru heater
- Temperature probe is built into the heater
- Freeze & Overheat protection
- Self-Diagnostic
- Programmable filter cycles
- Corrosion-free enclosure
| Spa Pack Model | IN. YE-3-H3.0 |
| Spa Pack MPN | 0610-221069-382 |
| Heater Power | 3.0kW |
| Circ Pump | Yes |
| Pump 1 | 3 |
| Blower | No |
| Lights | Yes |
| Ozone | Yes |
| WiFi | N/A |
| Audio System | N/A |
| Compatible Topsides | IN.K Series |
| Auxiliary Topside | Not Compatible |
Environmental Conditions:
- Operates in temperatures from 0°C to 58°C with up to 85% non-condensing humidity.
- IPx5 waterproofing.
Electrical Specifications:
- Compatible with North American and European electrical systems.
Heat.wav Heater Compatibility:
- Supports 120/240V heaters with wattages up to 5.5kW.
Dimensions:
- Compact design measuring 493mm x 273mm x 115mm.
Ratings:
- Heater Flow Rate: Minimum of 18 GPM (68.1 LPM) is required.
- Temperature (max): 58°C.
- Max Load: 48A (Single-Phase) / 20A (Dual-Phase) / 16A (3-Phase).
- Heating: 3kW at 230-240V.
