Aqua-flo XP2e Spa Pump (Smooth Body) - 2.0HP - 2 Speed
79mm Centre Suction x 79mm Side Discharge
An original Aqua-flo XP2e wet end fitted to a quality US Motors smooth body pump motor.
Smooth body motors are best used when space, height in particular is an issue.
This hot tub pump will directly replaces the older XP2 version, usually fitted with smooth body motors from Emmerson or AO Smith.
The XP2e range of pumps are also suitable replacements for other bands of pump with 2.0" intake and outlet connections, such as Waterway, Sta-rite and Vico.
The Aqua-Flo by XP2 pump is designed for today's large spas with multiple jets requiring increased flow. The XP2e pump fits within the same envelope as the original XP2 pump, yet provides greater flow than its predecessor with its superior design and parts. This allows spas to use more jets per pump while still operating at a whisper quiet noise level.
The energy consumption of the pump allows for the same and greater flow rates while improving the overall energy efficiency of the spa, reducing consumer operating costs.
The XP2e pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.
| Dimensions L x W x H | 445x200x200mm |
| HEAD - H max | 12 / 3m |
| FLOW - Q max | 884 / 500 lpm |
| Type / Speed | 2 Speed |
| Model | XP2e |
| Horsepower | 2.0 Hp |
| MPN | 06120810-1040 |
| Voltage / Frequency | 220-240V / 50Hz |
| Amp Draw | 9.0/8.6 - 2.9/3.2 A |
| Power - P1 | 1.5/0.19 kW |
| RPM | 2850/1425 |
| Capacitor Size(s) | 53-64 µF |
| Frame Size | 48F |
| Cord / Plug Type | 3 Core AMP |
| Union Connection Ref | 2.0 " (Inch) |
| Part No. | 91041825-000 |
| Connection Diameter | 79mm |
| Thread Type | Male - Buttress |
| Impeller Part No. | 91695250 |
| Impeller Diameter | 104mm |
| Impeller Vane Gap | 11mm |
| Impeller Dot Colour | Silver, Silver |
| Shaft Seal Type | PS-200 |
| Spare Parts Available | Yes - See Spare Parts List |
Top Tip:
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
- 1.5" pump connections have an outside diameter of approximately 63mm.
- 2.0" pump connections have an outside diameter of approximately 79mm.
- 2.5" pump connections have an outside diameter of approximately 92mm.
