Gecko IN.TEMP Heat Pump - 5kW
Works with IN.Y Series Spa Packs
Heat
Get ready to appreciate the power of the most eco-efficient technology to heat spa water.
Cool
Its so nice to step in cool water during a hot sunny day. Now, it is possible to do so with a spa! Get more out of a spa by taking advantage of the powerful in.temp cooling capabilities.
Plug and Play Solution
Geckos new heat pump solution. Using our in.temp has never been so easy! Simply connect it to a Y series control that supports it and you're good to go. Automatic detection, smart power management and no additional power circuit required, the in.temp powers directly from the spa control.
Benefit from Energy Savings
If you are looking for the most energy efficient form of heating water, the in.temp is the perfect solution. Air sourced heat pumps, will allow you to save up to 75% energy consumption in comparison with electric elements. Geckos in.temp also uses an eco-friendly refrigerant (R32 and R410A).
Total Flexibility with its Various Modes
With in.temp, you can choose one of its six modes of operation that suits you the best: Eco Heat, Smart Heat, Eco Auto, Smart Auto, Cool and Electric. Whatever the weather, your spa will always be at the perfect temperature.
Smart modes let you take full advantage of your in.temp to maximise your savings
PLEASE NOTE: The IN.Temp Heat Pumps work with IN.YE and IN.YT spa packs with RS-485 interface only. Please refer to your Spa Pack documentation to identify is your model is compatible.
| Model | in.temp-H5.0-CE |
| MPN | 0615-807002 |
| Season | All Year |
| Installation | Outdoors |
| Connection | 1.5", 50mm |
| Dimensions (W x D x H) | 794 x 395 x 555 mm |
| Weight | 39 Kg |
| Noise (1m) | 51.5 dB(A) |
| COP at A15/W25 | 4.59 |
| COP at A27/W27 | 6.21 |
| Nominal flow volume | 2.27 m³/h |
| Refrigerant | R32 |
| Heating Capacity A27/W27 | 5.54 kW |
| Heating Capacity A15/W25 | 3.99 kW |
| Input Power | 1.2 kW |
| Power Supply | 220-240V / 50Hz |
| Current Rating | 3.9 AMP |
| Maximum Operating Current | 6.07 AMP |
Heater Specifications
Dimensions
- 794 x 555 x 395 (mm)
Summary
- Power Input (max): 1.29kW
- Rated Current: 3.9A
- Max. Current: 6.07A
- Pressure: Min. 218psi / Max. 609psi
- Best Flow Rate: 2.27m3/h / 10GPM
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
