Pure-Spa Hot Tub System Flush
Hot Tub Plumbing System Cleaner (2 sizes available)
to save 10%
on Pages 4 and 1
Pure-Spa Hot Tub System Flush - 500ml & 5 Litre
Specially formulated to help clean inside the plumbing system of your Hot Tub.
Hot Tub plumbing systems must be cleaned regularly to help remove the unseen build up of bathing deposits, body fats and dirt. Regular flushing helps to prevent the formulation of biofilm which is a breeding ground for undesirable bacteria. Pure-Spa Hot Tub System Flush should be used every time the Hot Tub water needs replacing.
Usage Guide:
1. Remove the filter cartridges from your Hot Tub.
2. Prior to draining your hot tub: add approx half bottle (250ml) of 'Pure-Spa Hot Tub System Flush' to the warm water. This is based on an average 1500 litre Hot Tub. Increase dosage if necessary.
3. Close the air controls and run the pump/jet system for 20-40 mins.
4. Leave the treated hot tub to run on low speed for 12 hours or overnight if possible.
5. Drain the tub and wipe interior surface.
6. Reinstall the cleaned filters, refill and balance water.
Please take note of safety and handling advice as stated on the label
Available in two sizes 500ml & 5 Litre
- Volume 500ml - Approx 2-3 applications.
- Volume 5L - Approx 20 applications
NB: Due to postal restrictions the 5 Litre tub cannot be posted outside UK Mainland.
